POWER INJECTOR (802.3BT), 5G MGIG ETHERNET REMANUFACTURED

Product image

Manuals & Resources

MANUAL User Manual › DATASHEET Product Datasheet › BROCHURE Manufacturer Brochure › MANUAL Assembly Instructions › WARRANTY Warranty Information › DATASHEET Product Fiche › GUIDE Energy Guide › SAFETY Safety Data Sheet › SAFETY Safety Data Sheet (FR) › SAFETY COSHH Sheet › TOUR Product Tour › 360 360° Product View ›

CISCO SYSTEMS Power Injectors/Splitters

POWER INJECTOR (802.3BT), 5G MGIG ETHERNET REMANUFACTURED

Mfr # AIR-PWRINJ7-RF SKU 14044595

$173.74 MSRP $292.00 Save 41%

Regular price saves you $118.26 against MSRP.

Available

Product Overview

POWER INJECTOR (802.3BT), 5G MGIG ETHERNET REMANUFACTURED

Cisco (AIRPWRINJ7RF) Power Injectors/Splitters
Cisco Multigigabit 802.3bt Power Injector - 120 V AC, 230 V AC Input - 57 V DC, 1.16 A Output - 1 x RJ-45 Input Port(s) - 1 x RJ-45 Output Port(s) - 50 W
Cisco Multigigabit 802.3bt Power Injector
120 V AC, 230 V AC Input - 57 V DC, 1.16 A Output - 1 x RJ-45 Input Port(s) - 1 x RJ-45 Output Port(s) - 50 W

Technical Specifications

Product Type	PoE Injector
Input Voltage	120 V AC
Input Voltage	230 V AC
Manufacturer Part Number	AIR-PWRINJ7-RF
Limited Warranty	90 Day
Weight (Approximate)	8 oz
Length	5.5"
Manufacturer	Cisco Systems, Inc
Product Name	Multigigabit 802.3bt Power Injector
Protection Type	Short Circuit
Protection Type	Overload Protection
Protection Type	Over Voltage
Protection Type	Over Current
Protection Type	Over Temperature
Brand Name	Cisco
Input Ports	1 x RJ-45
Output Ports	1 x RJ-45
Height	1.5"
Width	2.6"
Maximum Input Current	2 A
Maximum Output Current	1.16 A
Maximum Output Power	50 W
Product Condition	Refurbished
Minimum Output Voltage	54 V DC
Maximum Output Voltage	57 V DC
Minimum Output Current	0 A
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)

Marketing Information

Compatible Products:

Access Points
Network Devices

The Cisco^®Multigigabit 802.3bt Power Injector(Figure 1) is a reliable, standards-compliant power injector capable of powering the latest high-performance access points and other network devices.

One of the main limitations in designing your wireless network is the availability of power. Running power cabling is also a primary cost driver of wireless installations. The Cisco Power over Ethernet (PoE) Injector allows delivery of both data and power to a Cisco access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage at a much lower installation cost.

The Cisco 802.3bt PoE Injector provides fully compliant 802.3bt detection, with disconnect, short-circuit, and overload protection to ensure that only 802.3bt, 802.3at, and 802.3af devices receive power, and that non-compliant devices are not accidentally damaged. Using this injector, it is possible to power the latest generation of 802.11ax devices that require higher power as well as providing multigigabit support.

Regardless of the deployment scenario, powering Cisco devices with 802.3bt Power over Ethernet with multigigabit is a flexible and low-cost method to simplify the installation process while ensuring that network design is not compromised by power availability limitations.

Features and benefits

The Power Injector powers reliable wired network devices that provide a robust, mobile end-user experience. Table 1 lists the injectors features and benefits.

802.3bt
802.3at
802.3af
802.11ax
IEC 61000-4-2, +/- 6kV
IEC 61000-4-3, 3V/m, 80%am, 1kHz, 80MHz to 1GHz Criterion A
IEC 61000-4-4. +/-1kV on input, Criterion B
IEC 61000-4-5 (lightning surge, AC Input port), 1.2/50 µs / 8/20 µs combination wave, +/-6kV from line to line,+/-6kV line to earth, Generator impedance ?2ohm; Criterion B
EN55204 (lightning surge, RJ45 port), 10/700 µs wave +/-2kV all lines to earth
IEC-61000-4-6 (conducted immunity), 3V, 80%AM, 1kHz, 150 kHz-80MHz; Criterion A
CISPR 32/EN55032 Class B FCC Part 15 Class B
Safety UL
CE
CCC
IEC 62368
EN 62368
UL 62368