POWER INJECTOR, 60W, OUTDOOR, NORTH AMERICA PLUG

Product image

Manuals & Resources

MANUAL User Manual › DATASHEET Product Datasheet › BROCHURE Manufacturer Brochure › MANUAL Assembly Instructions › WARRANTY Warranty Information › DATASHEET Product Fiche › GUIDE Energy Guide › SAFETY Safety Data Sheet › SAFETY Safety Data Sheet (FR) › SAFETY COSHH Sheet › TOUR Product Tour › 360 360° Product View ›

CISCO SYSTEMS Power Injectors/Splitters

POWER INJECTOR, 60W, OUTDOOR, NORTH AMERICA PLUG

Mfr # AIR-PWRINJ-60RGD1= SKU 11451233 UPC 882658905322

$632.41 MSRP $1,062.88 Save 41%

Regular price saves you $430.47 against MSRP.

Available

Product Overview

POWER INJECTOR, 60W, OUTDOOR, NORTH AMERICA PLUG

Cisco (AIR-PWRINJ-60RGD1=) Power Injector/Splitter
Cisco Aironet PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 2 A Output - 1 x Ethernet Input Port(s) - 1 x Ethernet Output Port(s) - 60 W - Pole/Wall-mountable
Cisco Aironet PoE Injector
120 V AC, 230 V AC Input - 55 V DC, 2 A Output - 1 x Ethernet Input Port(s) - 1 x Ethernet Output Port(s) - 60 W - Pole/Wall-mountable

Technical Specifications

Product Type	PoE Injector
Compatibility	Cisco Aironet 1560 Series Outdoor Access Points
Input Voltage	120 V AC
Input Voltage	230 V AC
Manufacturer Part Number	AIR-PWRINJ-60RGD1=
Weight (Approximate)	2.98 lb
Length	8.4"
Manufacturer	Cisco Systems, Inc
Product Name	Aironet PoE Injector
Mount Type	Pole/Wall-mountable
Product Line	Aironet
Protection Type	Surge Protection
Brand Name	Cisco
Input Ports	1 x Ethernet
Output Ports	1 x Ethernet
Country of Origin	Philippines
Height	2.8"
Width	5.9"
Environmentally Friendly	Yes
Maximum Output Current	2 A
Maximum Output Power	60 W
Maximum Output Voltage	55 V DC
Environmental Compliance	Restriction of Hazardous Substances (RoHS)
Environmental Compliance	Waste Electrical and Electronic Equipment Directive (WEEE)

Marketing Information

The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point.

The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable.

The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG.

The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.

A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements.