STAGE RIGHT BY MONOPRICE 15A POWER CONDITIONER AND SEQUENCER WITH 8 OUTLETS AND

Product image

Key Features

PDU provides power control as remote controlled relay & load monitoring
With switched PDU, remotely monitor, connect or disconnect data center loads
NEMA 5-15R receptacle type to ensure maximum usability and reliable power output
120 V AC input voltage for optimal performance with maximum usability

MONOPRICE, INC. PDUs

STAGE RIGHT BY MONOPRICE 15A POWER CONDITIONER AND SEQUENCER WITH 8 OUTLETS AND

Mfr # 604830 SKU 7692951 UPC 889028043134

$162.07 MSRP $199.99 Save 19%

Regular price saves you $37.92 against MSRP.

Available

Product Overview

STAGE RIGHT BY MONOPRICE 15A POWER CONDITIONER AND SEQUENCER WITH 8 OUTLETS AND

Monoprice (604830) PDUs
Monoprice 604830 10-Outlets PDU - Switched - 8 x NEMA 5-15R, 2 x NEMA 5-15R - 120 V AC - Overload Protection, EMI Filter, RFI Filter - 1U - Rack-mountable - Rack
Monoprice 604830 10-Outlets PDU
Switched - 8 x NEMA 5-15R, 2 x NEMA 5-15R - 120 V AC - Overload Protection, EMI Filter, RFI Filter - 1U - Rack-mountable - Rack

Technical Specifications

Application/Usage	A/V Equipment
Product Type	PDU
Input Voltage	120 V AC
Manufacturer Part Number	604830
Limited Warranty	1 Year
Features	LED Status Indicator
Form Factor	Rack
Input Current	15 A
Manufacturer	Monoprice, Inc
Product Model	604830
Product Name	604830 10-Outlets PDU
Mount Type	Rack-mountable
Protection Type	Overload Protection
Protection Type	EMI Filter
Protection Type	RFI Filter
Rack Height	1U
Brand Name	Monoprice
Input Voltage Range	90 V AC - 130 V AC
Height	19"
Width	7.5"
Depth	1.8"
Receptacle Type	NEMA 5-15R
PDU Type	Switched
Receptacle Detail	8 x NEMA 5-15R
Receptacle Detail	2 x NEMA 5-15R

Marketing Information

Most sound reinforcement professionals realize the majority of equipment damage occurs while devices are either powered up or powered down. Power sequencing allows A/V equipment to be powered up in stages, which gives equipment time to idle before the next stage of equipment is engaged. When powering down, the sequence order is reversed, which results in a soft landing for your expensive AV equipment. Power sequencing can also prevent breaker trips caused by power surges during power-on.

This device provides two groups of three AC power outlets for low-powered devices and one group of two AC power outlets for high-powered devices. Each of these groups constitute a "zone" , which is sequentially powered on when power is applied. The sequence is reversed when the sequencer is switched off. Zones are activated with 5 seconds of delay between each to prevent excessive surges to sensitive equipment and circuit breaker failure. It also minimized the annoying "pops" that can be audible through speaker systems.

In addition to the EMI and RFI filtering on all three zones, the conditioner checks for wiring faults and illuminates an LED indicator when the connected AC circuit is improperly wired. It is rated for 15 amps and has a front panel circuit breaker, two front panel unswitched and unfiltered AC power outlets, and LED fault indicators.

Features:

Two groups of three switched low-power AC outlets and one group of two switched high-power AC outlets
Two unswitched and unfiltered front panel AC outlets
Each group constitutes a Zone, which is powered on sequentially, from Zone 1 to Zone 3
Zones are powered off in reverse sequence, from Zone 3 to Zone 1
EMI and RFI filtering for all switched outlets
Front panel 15 amp circuit breaker
Removable rack mount ears and 1U rack height